when i plug in the usb to both the pc and gameshark found new hardwear wizard comes up but i dont have and asks for the disk or any thing that like that to be put in but i dont have it i had to download it from this site so when i use sp the usb dosnt connect to the it

Have you installed the patch?

i think so
XplDbClientPatch right?

The correct way to install it is to install it in the following order:

Install File (GSSP V1.1)

Then reboot! The reason why you should reboot is so the memory is cleared of data left behind! It also does other things too but it is best to reboot after!

Then download " XplDbClientXP" and install it. Then reboot again.

Then install "Patch (GSSP UI)" then reboot.

After this you need to do the following:

1) Insert a GBA Game into the MadCatz Game Shark SP.
2) Insert that into a Nintendo Unit (GBA or GBASP or GBAMicro or DS or DSLite).
3) Plug in the correct USB Cable (the correct cable is needed. It can not be one used for charging). The correct cable should plug into the back of your Nintendo unit (GBA or GBASP or GBAMicro or DS or DSLite) and it should be labeled "EXT. 1". If it does not then that is the problem (you don't have the correct cable)! DO NOT connect the to the USB port on your PC yet!
4) Make sure that the GS Switch (its the only switch on the MadCatz Game Shark SP) is in the "ON" position.
5) Turn on your Nintendo Unit and wait for the code screen to appear!
6) Now plug in the cable to your USB port on your PC. It is best to plug it into a free port (it is also best that no other devices are connected to the same port). You should avoid using a hub as this tends to give you errors. I suggest you plug it directly into a port!

If everything is good and the green light on the USB Cable lights then you can now run the PC App! Running it before you do all this can also cause errors. I know because it has happened to me! If the pc app does not see it then unplug your USB Cable and power down your Nintendo Unit and try again. You may have to force kill the PC App via "ctrl+Alt+Delete".

If your still having issues after you do a clean uninstall (That means you also delete any patches you may have installed and cleaning out the Registry. See my FAQ for more info!) reply back and we will see what else we do for you!

iv read around here and im not sure if this is a madcat gameshark it says v 1.2 but dosnt say any thing any where about it sept its a gameshark

If it looks like any of these found on the following thread then it is a MadCatz Product: http://forums.gameshark.com/index.php?show...28&#entry435128

Best way to tell is look at your Cheat device. If it has a somewhere you can plug in a USB port to it then it does not belong to MadCatz Inc. All MadCatz Game Shark SP product uses the Nintendo unit to make a USB Connection!

no mine looks like this http://picasaweb.google.com/Warlok.Obando/...109477138494626
(just a google search)
it dosnt have a usb plug in to the divice it self

Your product is made by InterAct. That company went bankrupt and is no longer supported. For more info please read the following thread: http://forums.gameshark.com/index.php?show...=findpost&p=161

This applies to all Game Shark products!

If you want to use any of the codes found in the Game Shark pages then you will need the correct product. Please note that the current model being sold does not come with the USB Cable!

If you do want one with a USB Cable then your best bet is eBay or some other online store that still has it for sale!

ah damn... thanks tho

It's ok.

I will now lock this thread since your problem was because you did not have the correct product! Your only bet is to google search for codes that work for the your product. Please note you are looking for codes that do not use a master code system and does not use 12 digits per line!

I suggest GameFAQs.